M5Stack M5StickC PLUS ESP32-PICO Mini IoT Development Kit

Description

The M5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen. It is a portable, easy-to-use, open-source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototyping. Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stack\’s product series. The compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU etc. Improvements from the regular StickC are a buzzer, bigger screen (1.14-inch, 135 * 240 resolution LCD Screen) and more stable hardware design. This revision increases the display area by 18.7% and the battery capacity from 95mAh to 120mAh. It also supports the HAT and Unit family of products. Notice Power Switch Operation Power on: Press the power button for 2 seconds Power off: Press the power button for 6 seconds Baud rate supported by M5StickC Plus: 1200 ~115200, 250K, 500K, 750K, 1500K G36/G25 share the same port, when one of the pins is used, the other pin should be set as a floating input For example, to use the G36 pin as the ADC input, Configuration the G25 pin as floating Lithium Battery Shipping:Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart, your shipping options will be limited and may cost more than our usual rates. Why? Features ESP32-based support BLE 4.2 and WiFi Built-in 6-Axis IMU Red LED IR transmitter Microphone RTC Buttons, LCD(1.14 inch) Built-in Lipo Battery Extendable Socket Built-in Passive Buzzer Wearable & Wall-mounted Development Platform UIFlow, MicroPython, Arduino Package Contents 1x M5StickC Plus Documents Quick Start Easyloader Schematic Pinmap Related-link Example USB Drive problems: UnitV/M5StickV/M5StickC/ATOM may not work without drivers in some systems. Users can manually install FTDI driver to fix this problem. Applications Internet of things terminal controller Wearable devices Stem education product DIY creation Specification Resources Parameter ESP32 240MHz dual-core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual-mode Bluetooth Flash Memory 4MB Power Input 5V @ 500mA Port TypeC x 1, GROVE(I2C+I/0+UART) x 1 LCD screen 1.14 inch, 135*240 Colorful TFT LCD, ST7789v2 Button Custom button x 2 LED RED LED MEMS MPU6886 Buzzer built-in buzzer IR Infrared transmission MIC SPM1423 RTC BM8563 PMU AXP192 Battery 120 mAh @ 3.7V Antenna 2.4G 3D Antenna PIN port G0, G25/G36, G26, G32, G33 Operating Temperature 32F to 104F ( 0C to 40C ) Net weight 15g Gross weight 21g Product Size 48.2*25.5*13.7mm Package Size 65*25*15mm Case Material Plastic ( PC )