Hakko FR-702 Dual Port Rework System

Description

Overview

• Powerful rework stations that contain every function needed for rework

• Safer and more secure rework operation

• With upgraded all the applications

• 4-in-1 unit for space saving

• Compatible with N2 system by purchasing N2 iron (FX-8802) as an optional accessary

Contents

• Station

• Soldering iron (FX-8801)

• Desoldering gun (FR-4103)

• Iron holder for soldering gun (with cleaning wire)

• Iron holder for desoldering iron (with cleaning sponge, cleaning wire)

• Tool box (Cleaning pin for 1.0 mm, Cleaning pin for heater, Cleaning drill for 1.0 mm, Nozzle wrench, Filter [qty 2], Ceramic paper filter [qty 4]),

• Handpiece holder for hot air

• Pad (3mm, 5mm, 7.6mm: qty 2 each

• Heat resistant pad

• Vacuum Pipe Control Knob (L with screw)

• Color band (qty 2)

• Power cord

• Instruction manual

Features

4 Port Rework Station with 140 W desoldering gun, M-type soldering iron and 670W hot air

• It handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types.

Other than the standard handpieces of 140 W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type.

• High-power Desoldering gun HAKKO FR-4103

Increasing the power to 140 W from 50 W of our previous models (HAKKO 474, 475), it can make it easy to desolder on multi-layer {WB which was never an easy job, and it can also shorten the process time. A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works. Long type nozzles for narrow space. Oval shape nozzles for flat terminals. SS type nozzles for micro land-patterns.

• Soldering iron HAKKO FX-8801/FX-8805

Thermal conductivity has been increased by reviewing external configuration and internal struction of 900 tip series. Now T18 and T19 tip series are selectable depending on work environment.

• Hot air handpiece

670 W high power and large volume hot air improves work efficiency.

• N2 soldering iron HAKKO FX-8802

The N2 gas runs into the nozzle assembly and covers over the soldering tip. It prevents the soldering tip and the heater from being readily oxidized and performs great role as a preheating. Two effects of N2 system, preventing oxidation or preheating effect, can improve soldering defects such as bridging, protrusion icicle, insufficient solder filling in PTH, etc. T18 tips series are compatible with this application.

• One-hand Manual-solder-feed iron HAKKO FX-8803

Solder and feed with one hand. Feed a set amount of solder with one hand. Manual feed system is perfect for cellular manufacturing. Soldering work can be conducted at the pace of the operator. T18 tips series are compatible with this application.

• SMD Hot Tweezer HAKKO FX-8804

Direct heating – less influence upon surrounding components on crowded boards. Easily removes SMD chips and flat packages up to 25mm. The collet allows easy replacement and alignment of the tips.

Specifications

Model No	FR-702 (Desoldering Tool: FR-4103)
Power Consumption	1,030W

STATION

Dimensions	370 (W) x 150 (H) x 220 (D) mm
Weight	9kg

STATION (SOLDERING)

Output Voltage	AC 26V
Temperature Range	50 to 480 C
Temperature Stability	1 C at idle temperature (when set to 200 to 480 C)

STATION (DESOLDERING)

Output Voltage	AC 24V
Vacuum generator	Vacuum pump, double cylinder type
Vacuum pressure	80kPa (600mmHg)
Suction flow	15L/min
Temperature Range	330 to 450 C
Temperature Stability	5 C at idle temperature

STATION (HOT AIR)

Power Consumption	30W
Air Flow	1 to 9 (5 to 115L/min)L/Min
Temperature Range	50 to 600 C

SOLDERING IRON

Power Consumption	65W (26V)
Tip to ground resistance	<2
Tip to ground potential	<2mV
Heating Element	Ceramic heater
Standard Tip	Shape-B (No.T18-B)
Cord Length	1.2m
Total Length	222mm (with B tip)
Weight	52g (with B tip)

DESOLDERING GUN

Power Consumption	140W (24V)
Nozzle to ground resistance	<2
Nozzle to ground potential	<2mV
Heating Element	Composite Heater
Standard Nozzle	1.0mm S type (No.N61-05)
Cord Length	1.2m
Total Length	168mm (with 1.0mm S type nozzle)
Weight	190g (with 1.0mm S type nozzle)

HANDPIECE (HOT AIR)

Power consumption	670W
Total length	250mm
Weight	180g

The suction flow is measured at the filter case suction port of station.

Airflow capacity is rated as free flowing. Restrictions created by various nozzles may reduce the maximum airflow capacity.

Total length and weight (w/o cord, hose)