Hakko HFN1010 IoT Capable Soldering Station

Description

Overview

• Improve traceability

• Minimize human error

• Optimize soldering conditions

Features

Enables human error-free temperature control and traceability of manual soldering process

• FN-1010 and FG-100B equipped with communication function

• Pioneer the future of soldering with advanced IoT technology

“Process control” and “Traceability” can be established through daily manual soldering operation

• Optimization of soldering conditions is now possible based on a variety of information in daily soldering process collected by FN-1010

• The following information can be collected by memory chip in T36 series tip and saved in a computer through a soldering station (Tip shape, Tip Serial number, Number of loads, Total time of power supplied, Load sensitivity, Type of solder alloy (Lead-Free / Lead), Count alarm)

Automatic calibration/off-set can be completed once measurement result is sent through infrared

• Human error-free “tip temperature calibration ” and “off-set” can be established through daily manual soldering process

• Results of measurement/calibration/off-set can be recorded automatically

Options for IoT communication

Visualize energy supplied during soldering

• It is now possible to visualize invisible energy supplied from T36 series tip during soldering. And that makes it possible to control factors of soldering, which were impossible before

Real-time work status on the LCD screen

Improved button operation

• Quick access to “Preset temperatures” and “Off-set mode” with one push

• It takes few button operation to access to most frequently used functions

Notification of alarm with sound and vibration: Alarm can be notified with vibration in a noisy environment

Free fall detection function

• Built-in motion sensor detects free fall and cuts the power

• It can prevent burning floor, a fire and other accident with the heat

Tip cleaner with solder ball preventive design

• Solder ball during tip cleaning can be reduced by 99% with devised cleaner designs such as smaller aperture, and set angle as well as position

Tip replacement without heat resistant pad

Contents

• Station

• Handpiece (FN-1101)

• Tip Cleaner (FT-401 with cleaning wire)

• Power cord

• Iron Holder (FH-210

• Instruction Manual

Specifications

Model No.	FN-1010
Power consumption	100W
Temperature range	50 to 450 C
Temperature stability	3 C

Station

Output voltage	AC 21V
Dimensions	104(W)138(H)152(D)mm
Weight	1.9kg

Soldering Iron

Power consumption	95W (21V)
Tip to ground resistance	<2
Tip to ground potential	<2mV
Heating element	Composite heater
Cord length	1.2m
Total length	180mm (with 2.4D tip)
Weight	32g (with 2.4D tip)